Skip to main content
 
Proudly Serving Northwest Chicago
Home Repiping
Get intelligent solutions for your home’s plumbing, heating, and cooling needs.

Home Repiping Services in Mount Prospect, IL

A lot of Mount Prospect, IL, houses went up during the postwar building boom, and many still carry water through the galvanized steel pipe they were built with. Over sixty-plus years, rust builds up inside that pipe until less water can get through and what does come out may be tinted brown. Pinhole leaks start showing up in different spots, and each patch only buys a little time. Home repiping replaces the worn-out supply lines with new pipe, bringing back steady water pressure and clean water at every tap.

Repiping From a Licensed Mount Prospect Plumber

Intelligent Service is a family-owned plumbing, heating, and cooling company in Mount Prospect, IL, that handles whole-house and partial repiping for homes across the northwest suburbs. Our plumbers work under Illinois plumbing contractor license 055-011696.

Repiping means working inside your home for several days, so our crews protect floors with tarps, wear shoe covers, and clean up at the end of every job. Financing is available to help spread out the cost of a larger repipe. We also handle leak detection, plumbing repair, and water heater work when those are part of the project.

Signs Your Home Needs Repiping

Aging pipe usually gives plenty of warning before it fails. Repiping is worth considering if you notice several of these:

  • Weak water pressure: Showers and faucets lose pressure, especially when more than one fixture runs at once.
  • Brown or yellow water: Discolored water, often worse first thing in the morning, points to rust inside the pipe.
  • Repeated leaks: Pinhole leaks keep appearing in different places along the same lines.
  • Visible corrosion: Exposed pipe in the basement shows rust, flaking, or green buildup at the joints.
  • Metallic taste or smell: Water that tastes like metal can come from corroding pipe.
  • Galvanized pipe: Gray steel pipe with threaded fittings is common in homes of this era and is often near the end of its life.

One of these on its own may only need a repair, but several together usually mean the pipe throughout the house is wearing out.

Repiping Options for Older Homes

Every repipe starts with a look at the pipe that’s there now and how it runs through the house. Then we’ll lay out a plan that fits your home and budget.

Whole-House and Partial Repiping

A whole-house repipe replaces every hot and cold supply line from the water meter to the fixtures. It’s usually the best value when the original galvanized pipe is failing throughout the home.

A partial repipe replaces specific sections, such as the main line from the meter or a branch feeding a bathroom or kitchen. It can make sense when one area is clearly worse or when part of the home was already updated. Most repipes today use copper or PEX, and we’ll explain the trade-offs between the two in plain terms.

Most whole-house repipes take a few days, and water is usually only shut off during parts of each day. Small access openings are needed to reach pipe inside walls and ceilings, and we’ll go over where those will be before work starts.

Related Services

Before committing to a full repipe, it can help to know exactly where water is escaping. Our leak detection and repair service pinpoints hidden leaks in walls, floors, and slabs.

If only one or two spots are failing, a targeted plumbing repair may be enough for now. Our full range of plumbing services covers everything from fixtures to water heaters.

Schedule a Repiping Consultation in Mount Prospect

If your water pressure keeps dropping or the leaks keep coming, it’s a good time to look at the pipe behind the walls. You can book a repiping consultation online, and a plumber will check the condition of your pipe and talk through your options. You’ll get an honest recommendation, whether that’s a repipe or a simpler repair.

Frequently Asked Questions

How much does it cost to repipe a house?

Repiping cost depends on the size of the home, the number of bathrooms and fixtures, the pipe material, and how easily the existing lines can be reached. A partial repipe costs less than replacing every line in the house. We’ll walk you through the price before any work begins.

How long does it take to repipe a house?

A typical whole-house repipe takes about two to five days, depending on the size of the home and how the pipe is routed. Partial repipes are often finished in a day or two. We’ll give you a realistic schedule before the project starts.

Do I need to move out while my house is repiped?

Most families stay home during a repipe. Water is shut off only while lines are being switched over, and it’s usually back on by the end of each workday.

Cartoon illustration of a man with wild grey hair and mustache, smiling.

Written By Intelligent Service

Plumbing, Heating, and Cooling
Since 1979, we’ve combined expert craftsmanship with thoughtful solutions to help homeowners stay comfortable and confident in their homes,
THE GENIUS CLUB

Breakdowns Are Expensive. Being a Genius Isn’t.

Get ahead of unexpected repairs with professional maintenance, exclusive savings, and valuable member benefits.
Priority Service Scheduling
10% Off Repairs
Waived Service Call Fees*